MarkA
Full Member
Midland, TX
Posts: 63
|
Post by MarkA on Feb 14, 2004 23:03:21 GMT -5
Got this new AR I have to get zeroed prior to Snyder Contest. Using my ballistics software for 200 yard zero, 2800' Alt. 50 Deg F, 1.5 scope height, 3300 fps muzzle, 0.242 BC for Hornady 50 gr V Max shows 1.3 inches of elevation at 100 yds. Therefore, if I zero at 1.3 inches high at 100 yds I am on at 200, this correct is it not?  |
|
|
|
Post by Bobcat on Feb 14, 2004 23:07:48 GMT -5
Yep!  .......assuming all of your data is correct. Go get 'em! Bob |
|
|
|
Post by Jeff in TX on Feb 15, 2004 12:52:13 GMT -5
Looking over your data I saw one item you might want to recheck. Your data shows your scope height at 1.5 inches. Don't take that for granted. Measure it and adjust your ballistic inputs on your program. I find 1.5" inches to be low, especially for an AR. But, I don't know your exact setup.
Other than that, everything looks great.
Best of luck.
|
|
|
|
Post by AlleninAlaska on Feb 15, 2004 18:29:17 GMT -5
Why not just take it out and shoot it to verify your data?
|
|
